Filter
Top Products
CLOCK SETTING
3&5
2,4&6
1
4
Press the TIME/TUNING
switches to select the correct
hour time. Observe the AM & PM
indicators, advance the time 12
hours to change AM to PM.
2
Once the set is connected with the
AC power, the display will show as
right:
3
Press the PROGRAM(STORE)
switch to accept the hour time and
switch to minute setting.
5
6
HOUR
MINUTE
Connect the AC power cord (see page 3).
Press the PROGRAM(STORE)
switch, the hour digits will flash for
10 seconds.
Press the TIME/TUNING
switches to select the correct
minute time.
Press the PROGRAM(STORE)
switch again to complete clock
setting. The numbers will not
flash, but the colon : will flash,
indicating that the clock is set.
AM
AM
AM
AM
AM
AM
NOTE: If the POWER switch is
ON and you want to set
the time, press the TAPE
switch first, and then
follow the listed steps to
set the clock.
5
IB-SL328-SY-WM-E-120801