CONNECTING TO HOME STEREO SYSTEMSCONNECTING TO HOME STEREO SYSTEMS
CONNECTING TO HOME STEREO SYSTEMSCONNECTING TO HOME STEREO SYSTEMS
CONNECTING TO HOME STEREO SYSTEMS
The Line Out Jack is made to accept a stereo mini plug (3.5mm). By using a commercially available
audio line cable (not included), simply connect the cables mini plug to the Line Out Jack on your
player, and the other appropriate end usually RCA JACKS to the CD/AUX
INPUTSINPUTS
INPUTSINPUTS
INPUTS of your home
stereo.
NOTE:NOTE:
NOTE:NOTE:
NOTE: Always switch the power off before making any connections between the player and any
other set.
NOTE:NOTE:
NOTE:NOTE:
NOTE: The Volume Control of your player becomes inoperable whenever Line Out Jack is used.
Adjustments are made on your audio system.
CLEANING THE CABINETCLEANING THE CABINET
CLEANING THE CABINETCLEANING THE CABINET
CLEANING THE CABINET
Wipe with a soft cloth. If the cabinet is very dirty, dampen (not dripping wet) the cloth with a weak
solution of soapy water, and then wipe clean.
11
YOUR CD PLAYER
TO AUX IN JACKS
TO LINE OUT JACK
YOUR STEREO
SYSTEM
OPTIONAL CABLE
3.5mm TO RCA JACKS
CD-78(72RD)070299 NL v.1 E
CLEANING THE LENSCLEANING THE LENS
CLEANING THE LENSCLEANING THE LENS
CLEANING THE LENS
A dirty lens will cause sound skipping. If the lens is very dirty, the player may not work. We suggest
using a special cleaning disk (not included) available in most music and Hi-Fi stores. However, if you
do not have one, you may use the instructions below.
You may use a cotton swab very slightly dampened with alcohol to clean the lens (start in the middle
and work you way out).