Filter
Top Products
IB-CD2036(SY)-WM-E-010805
•
To record on a tape with its tab broken off,
cover the respective tab hole for side A
or B with adhesive tape.
•
Use of a cassette with more than 90
minutes, such as C-120 (120
minutes), is not recommended. The
extreme thinness of this tape may
damage this set.
•
To reduce the chances of tape jamming
or tangling, you should check that there
are no loose layers of tape visible
through the cassette center window. If
any, tighten these loose layers of tape
using a pencil before inserting the
cassette into the set.
Side A
Tab for side A
Tab for side B
15
Notes on Cassettes
•
Break off the cassette tab from side A or
B to prevent accidental recording.
MAINTENANCE
Cleaning the Lens
If the lens becomes dirty, it may cause a
skipping of sound during CD operation.
Clean with a commercially available lens
cleaner and blower.
RECORD/PLAYBACK HEAD
PINCH ROLLER
CAPSTAN
COTTON SWAB
ERASE HEAD
Cleaning the Tape Head
Wipe the tape head, the pinch roller and
the capstan with a cleaning swab slightly
moistened with cleaning fluid or alcohol
after every 10 hours of operation for
optimum playback and recording quality.
After cleaning, insert a tape when the
areas cleaned are completely dry.
NOTE:In order to see and clean the tape
head, you may have to press
PLAY first.
Notes for Storing
Cassette Tape
1. Do not put a tape near a magnetic field,
such as a TV, or speaker. Magnetic
fields may reduce the tape sensitivity or
even erase the recording.
2. Do not store tape for any length of time
in a hot, moist or dusty place.
Cleaning the Cabinet
Clean the cabinet, panel and controls with
a soft cloth slightly moistened with a mild
detergent solution. Do not use any type
of abrasive pad, scouring powder, or
solvent, such as alcohol or benzine.
IB-CD2036(SY)-WM-E-010805.PMD 2/23/2005, 2:38 PM16