Filter
Top Products
RANDOM PLARANDOM PLA
RANDOM PLARANDOM PLA
RANDOM PLA
YY
YY
Y
1. Press the Random Button either in stop mode or normal play mode, the set will play
all of the songs in random order. The display will show
RANDOM
icon.
CD OPERACD OPERA
CD OPERACD OPERA
CD OPERA
TIONTION
TIONTION
TION
2. Press the Forward Skip/Search ( )Button to skip to the next random song.
3. To resume normal play, press the Random Button again. The
RANDOM
icon will go
off.
PROGRAMMED MEMORPROGRAMMED MEMOR
PROGRAMMED MEMORPROGRAMMED MEMOR
PROGRAMMED MEMOR
YY
YY
Y
PLA PLA
PLA PLA
PLA
YY
YY
Y
Up to 20 tracks can be programmed for disc play in the order you like.
Programming can only be done during
STOPSTOP
STOPSTOP
STOP mode.
NOTENOTE
NOTENOTE
NOTE: Programming can
onlyonly
onlyonly
only be done when the CD is in the
STOPSTOP
STOPSTOP
STOP mode. (CD is
in the set, CD Switch is ON and Display shows the total number of tracks
(songs) and the total play time of the CD.)
EXAMPLE: TEXAMPLE: T
EXAMPLE: TEXAMPLE: T
EXAMPLE: T
o program track 4 to play first.o program track 4 to play first.
o program track 4 to play first.o program track 4 to play first.
o program track 4 to play first.
When CD has stopped,
Press the Program Button, will show and will flash in
the Display.
Press the Forward Skip/Search Button till track 4 appears.
The Display will show and flashing.
Press the Program Button, will show and will flash.
Press Play.
Track 4 will play first.
11
PROGRAM
PROGRAM
PROGRAM
PROGRAM
PROGRAM
PROGRAM
NOTE:NOTE:
NOTE:NOTE:
NOTE: The programmed memory will be cleared if the CD power is turned off.
TRACK
TRACK
PROGRAM
TRACK
PROGRAM
TRACK
PROGRAM
TRACK
PROGRAM
CD-160S050699 V.2
E
NOTE:NOTE:
NOTE:NOTE:
NOTE: If the
RANDOM
icon flashes and then disappears from the Display, turn off
the CD power and restart.
PROGRAMMED (MEMORPROGRAMMED (MEMOR
PROGRAMMED (MEMORPROGRAMMED (MEMOR
PROGRAMMED (MEMOR
Y) PLAY) PLA
Y) PLAY) PLA
Y) PLA
YBACKYBACK
YBACKYBACK
YBACK
1. During
STOPSTOP
STOPSTOP
STOP mode, press the Program Button.
2. The Display will show , and and
will flash in the display.
3. Press the Skip/Search Buttons either
or until
the desired track shows on the Display.
4. Press the Program Button. The Display will show .
5. Repeat steps 3 and 4 until all the desired tracks are
programmed.
6. When you finished programming, press the CD Play/Pause
Button.
7. All songs will play in the order you programmed.
8. The Display will show the track number being played,
and the will show (but not flashing) in the
display during programmed play.
9. If in middle of play, you want to hear the next
programmed song, press Forward Skip/Search .
10. When all the songs have finished playing, the set will
stop. disappears from the display.
11. To turn off the power, remember to press the Power
Switch again, the Power/Batt. Lamp will go off.