Lenoxx Electronics CD-1492 CD Player User Manual


 
CD OPERATION
REMOVING A DISC
1. Make sure the CD is not playing before removing the disc. If it is, press the CD
STOP button.
2. Press the CD door OPEN/CLOSE area to open the CD door.
3. Gently remove the disc.
4. Close the CD door by gently pushing the door down.
5. Replace the disc in its original case.
NOTE:Never press the CD door down during play, this may cause malfunction or
damage to the disc. Always stop the CD player by pressing the CD STOP
button before you take the disc out of the compartment.
SKIPPING TRACKS (SEARCH)
1. This function enables you to find the beginning of any desired track during play. If the
CD FORWARD SKIP/SEARCH ( ) button is pressed once or repeatedly, the NEXT
TRACK or one of the following tracks will be selected. The DISPLAY will show the
track or song number.
2. If the CD BACKWARD SKIP/SEARCH ( ) button is pressed twice or more in rapid
succession, play will go BACK one track per press.
3. When the set is in the pause mode, it is also possible to select the beginning of a
certain track by using the CD FORWARD SKIP/SEARCH( ) button and CD BACK
SKIP/SEARCH( ) button to reach the desired track. After selection, press PLAY.
4. During play, press and HOLD the CD FORWARD SKIP/SEARCH( ) button to search
forward at a high speed for a particular point of a song. Press and HOLD the CD
BACK SKIP/SEARCH( ) button to search backward. Release the button to resume
normal play when the point is found.
REPEAT PLAY - SINGLE SONG
To repeat the SAME song over and over again, do the following:
REPEAT PLAY - ALL SONGS
To repeat play ALL SONGS on a disc and then play them again and again, do the
following for non stop music.
1. When the CD is playing, press REPEAT/PROGRAM
button twice.
2. The REPEAT lamp will be flashing. All the songs
on the CD will play in order and then start all
over again.
3. To stop the repeat function, press the REPEAT/
PROGRAM button once.
8
1. When the CD is playing, press the REPEAT/PROGRAM button once.
2. The REPEAT lamp will be steady on. The song
currently playing will play over and over, till you press
Stop.
3. To stop the repeat function, press the REPEAT/PROGRAM
button twice.
NOTE: If you hit or move the set during play, the music will stop for a
second or two and then start again. This is normal operation
for all portable CD players.
IB-CD1492(AD)-WM-E-031402
REPEAT LAMP ON
REPEAT LAMP FLASHING
IB-CD1492(AD)-W-E-031402.p65 3/19/02, 2:16 PM9