Filter
Top Products
RANDOM PLAY
1. Press RANDOM button either in stop mode or normal play mode, the set will play all
of the songs in random order. The DISPLAY will show some moving symbols like
... ... every 5 seconds.
2. Press the FORWARD SKIP/SEARCH button to skip to the next random song.
3. To resume normal play, press RANDOM button again.
CD OPERATION
PROGRAMMED MEMORY PLAY
Up to 16 tracks can be programmed for disc play in the order you like.
Programming can only be done during STOP mode.
NOTE: Under some conditions you may be able to program more than 16 tracks.
PROGRAMMED (MEMORY) PLAYBACK
1. During STOP mode, press REPEAT/PROGRAM button.
2. The Display will show
.
3. Press the SKIP/SEARCH buttons either or
until the desired track shows on the DISPLAY. The
PLAY/PROGRAM lamp will flash.
4. Press the REPEAT/PROGRAM button. The Display will
show and the PLAY/PROGRAM lamp will flash.
5. Repeat steps 3 and 4 until all the desired tracks are
programmed.
NOTE: Programming can only be done when the CD is in the STOP mode. (CD is in
the set, FUNCTION switch is in the CD position and DISPLAY shows the total
CD tracks.)
EXAMPLE: To program track 4 to play first.
When CD has stopped,
Press REPEAT/PROGRAM button, will show and PLAY/PROGRAM lamp will flash.
Press the FORWARD SKIP/SEARCH button till track 4 appears.
The DISPLAY will show and PLAY/PROGRAM lamp will flash.
Press REPEAT/PROGRAM button, will show and PLAY/PROGRAM lamp will flash.
Press PLAY BUTTON.
Track 4 will play first.
9
6. When you finished programming, press the CD PLAY/PAUSE button.
7. All songs will play in the order you programmed.
8. The DISPLAY will show the track number being played, and the PLAY/PROGRAM lamp will
remain flashing during programmed play.
9. If in middle of play, you want to hear the next programmed song, press
the FORWARD SKIP/SEARCH .
10. When all the songs have finished playing, the set will stop. The PLAY/PROGRAM lamp
turns off.
11. To turn off the power, remember to press POWER switch again, the POWER/BATT.
lamp will go off.
NOTE: For programmed tracks from 11th to 16th, the
display will separately show ,
, , , and .
NOTE: The programmed memory will be cleared if CD door is opened or power is
turned off.
IB-CD1492(AD)-WM-E-031402
PLAY/PROGRAM
LAMP FLASHING
IB-CD1492(AD)-W-E-031402.p65 3/19/02, 2:16 PM10