Filter
Top Products
SET-UP
ASSEMBLY:
Before you begin assembly please be sure all parts and accessories have arrived intact. Please use the
check list below to identify and order parts and accessories
.
* Instruction manual * RCA cable * Slipmat * Platter
* 45 rpm adaptor * Headshell * AC cord * Counterweight
Note:
* Do not connect the AC power plug before assembly has been completed.
* Before turning the power on, make sure once again all the connections and power voltage settings are
correct.
Always turn off the power when connecting or disconnecting
* Read this manual carefully before using the unit. Be sure to store the manual in a safe place for future
reference.
* Attach a stylus cartridge to the headshell before assembling the turntable unit
.
1 Removing from carton:
Carefully remove the main unit with the packing material intact from the box. Remove the packing
material once the unit has been removed from the shipping carton. Be sure to locate all the accessories
located in the packing material.
2 45 adaptor:
Locate and remove the 45-rpm adapter from the packing material and place it in the 45 adapter cut out
on the top of the main unit.
3 Turntable platter:
Remove the turntable platter from the packing material and gently insert the platter into the center
spindle on the base of the turntable unit.
4 Drive hub:
Pull the belt to the lower side of the turntable over the drive hub.
5 Slipmat:
Remove the black slipmat from the packaging and place it on the platter.
6 Headshell:
Insert the headshell into the front end of the tonearm assembly. While holding headshell firmly into the
front end of the tonearm assembly, turn the headshell locking nut counter-clockwise to firmly secure the
headshell to tonearm assembly.
7 Counterweight: