Filter
Top Products
OPERATION
R.D.S. TA information was received
from current station and the radio
switched to that R.D.S. linked station,
but no information could not be
received because the R.D.S. linked
station is located too far from that
area. So the radio is switched back
to current station again.
In above operation, a customer listen
to a wrong program or mute sound
for a while.
R.D.S. TA LOCAL mode
When the filed strength level of R.D.S.
linked is less than threshold level,
the radio does not switch that station,
and a customer can hardly listen to
any disturbances.
When R.D.S. TA LOCAL mode is
selected, “R.D.S. TA LO” on numeric
display is indicated for a few
seconds.
R.D.S. TA DISTANCE mode
R.D.S. TA switching is try to
implemented by the information of
current station.
When R.D.S. TA DISTANCE mode is
selected, “R.D.S. TA DX” on numeric
display is indicated for a few
seconds.
The RDS data used are the PI, PS,
AF, TP, TA, R.D.S. and PTY data.
PI: Program Identification Code
Code for identifying programs
PS: Program Service Name
Broadcast station name data
expressed in
alphanumerically characters
AF: Alternative Frequencies
Frequency list of
broadcasting stations
transmitting the same
program
TP: Traffic Program Identification
Identification data for traffic
information broadcasting
station
TA:Traffic Announcement
Identification Identification
data showing traffic
information is being
transmitted or not
R.D.S.: Enhanced Other Networks
Information Broadcasting
information on PI, AF, TP, TA,
etc. relating to networks other
than the network used for
current reception
PTY:Program Type Code Contents
of programs such as news,
light music, sports etc.
CD OPERATION
• SWITCHING TO CD MODE
If there is no CD inserted in the driver:
Gently insert the CD with the printed
side uppermost into the CD
compartment until you feel some
resistance. The CD is drawn into the
drive automatically. CD playback
begins.
If a CD is already inserted in the driver:
Keep pressing MOD button (6)
shortly until the CD mode display
appears.
• SELECTING TRACKS
Press TUNE/SEEK/TRACK
button (16) or TUNE/SEEK/TRACK
button (17) to move the previous
track or the following track. Track
number shows on display.
Hold TUNE/SEEK/TRACK
button (16) or TUNE/SEEK/TRACK
button (17) to fast reverse or fast
forward. CD play starts from when you
release the button.
• PAUSING PLAYING
Press PAU button (20) to pause CD
player. Press it again to resume play.
• PREVIEWING ALL TRACKS
Press SCN button (21) to play first
several seconds of each track on the
current disc. Press it again to stop
intro and listen to track.
• REPEATING THE SAME TRACK
Press RPT button (22) to continuously
repeat the same track. Press it again
to stop repeat.
GB-13