Lenco Marine CS-1004 Stereo System User Manual


 
OPERATION
immediately to switch on or off R.D.S.
mode.
Whenever R.D.S. is switched on,
symbol “AF” appears on the display.
Program name is displayed on
receiving a R.D.S. station.
“AF” starts blinking if the
broadcasting signal getting worse.
“ALARM” will be displayed when an
emergency broadcasting is received;
meanwhile sound output level will be
adjusted to the preset output level
automatically when the volume
control is set at minimum.
- Regional Program Operation
Press AF/REG button (3) for several
seconds to switch on or off region
mode.
Some broadcasting stations change
their program from normal
broadcasting to regional
broadcasting for a certain time
period. When region is on, the
current listening program remains
unchanged. When region is off, it
allows the reception moves to the
regional station.
- Using PTY to Select Program
PTY button (1) is operated as follows:
While selecting PTY engagement, its
selection is implemented by preset
buttons as described in notes.
When PTY is selected, the radio
starts to search corresponding PTY
information, and stops if the
corresponding PTY information is
detected.
If corresponding PTY information is
not existed any more, PTY engaging
is automatically exit to normal mode.
Notes:
When PTY mode is engaged, the
PTY switch is shared as follows:
According to above 2 allotted group,
the preset number is used for PTY
selection as follows:
MUSIC group
- POP M, ROCK M
- EASY M, LIGHT M
- CLASSICS, OTHER M
- JAZZ, COUNTRY
-NATION M, OLDIES
- FOLK M.
SPEECH group
- NEWS, AFFAIRS, INFO
- SPORT, EDUCATE, DRAMA
- CULTURE, SCIENCE, VARIED
- WEATHER, FINANCE,
CHILDREN
- SOCIAL, RELIGION, PHONE IN
- TRAVEL, LEISURE,
DOCUMENT
- Listening to Traffic Announcement
TA button (2) is operated as follows:
When pressed short, it is engaging
whether TA mode on or off.
When TA mode, is on and a traffic
announcement is transmitted:
When the unit was in CD (MP3)
mode, it will switch temporarily to
radio mode.
Temporary switch over to an R.D.S.
linked station when R.D.S. detects a
traffic announcement on that other
program. If the volume level was
under the threshold point it will be
raised to the threshold point.
But the user changed the volume
level which was more than the
threshold point (min. TA volume
level), it will be set to the last level.
When TA mode is on, TA of individual
segment is turned on.
When a TP station is received, TP of
individual segment is turned on.
TA interruption function
The current traffic announcement is
cancelled by pressing this key.
But the TA mode will not be off.
When pressed long, it is selected
R.D.S. TA LOCAL/R.D.S. TA
DISTANCE mode.
The purpose of this key is to reduce
wanted R.D.S. TA switching, which
PTY MUSIC group PTY SPEECH group PTY off
PTY MUSIC group PTY SPEECH group PTY off
GB-12