Filter
Top Products
8
Kr
ell
S
–1500 Multi-channel Amplifier
Before you integrate the S–1500 Multi-channel Amplifier into your
system, review the following guidelines to choose the location for
the component. This will facilitate a clean, trouble-free installation.
The S–1500 amplifier requires at least two inches (5 cm) of clear-
ance on each side, and at least two inches (5 cm) of clearance
above and below the component to provide adequate ventilation.
The S–1500 amplifier does not require any type of special rack or
cabinet for installation. For the dimensions of your amplifier see
Specifications, on page 21.
Place the amplifier as close to the loudspeakers as possible and
keep the loudspeaker cable length to a minimum. Loudspeaker
cable adds impedance to the load that the amplifier must drive,
regardless of the cable’s gauge. Krell amplifiers drive the lowest
impedances with ease, but long loudspeaker cables reduce the
maximum power that is deliver
ed to the loudspeakers.
Krell recommends operating the S–1500 amplifier from a dedicat-
ed 15-amp AC power line. Please contact your Kr
ell dealer, distrib-
utor, or Krell befor
e using any devices designed to alter or stabilize
the AC power for the S–1500.
Placement
AC Power
Guidelines