Filter
Top Products
Troubleshooting System Noise
When you mix and match high-performance audio components,
each with its own ground potential, a low frequency hum may
occur in one or all loudspeakers. If this happens when you place
the S–1500 Multi-channel Amplifier into your system, follow these
simple troubleshooting steps:
1. Check that all input and output connections are of sound
construction.
2. With the amplifier off, remove all the interconnect cables, then
turn the amplifier on. If the hum disappears, turn the amplifier
off and reinsert one of the interconnect cables. Turn the
amplifier back on.
3. If the hum reappears with the interconnect cable reinserted,
the cable may need to be replaced. T
urn the amplifier off and
connect a different interconnect cable to the same location.
Turn the amplifier back on.
4.
If the hum disappears with the inter
connect cable reinserted,
that cable most likely is sound.
5.
Turn the amplifier off, disconnect the inter
connect cable, and
re-connect one of the other interconnect cables.
6.
Repeat steps 3 through 5 until you have checked each inter-
connect cable.
7. If all the inter
connect cables appear to be sound, and you still
have hum, you may be experiencing a ground loop. Please
contact your authorized Kr
ell dealer
, distributor
, or Krell for sug-
gestions on how to eliminate the hum.
16
Kr
ell
S
–1500 Multi-channel Amplifier