Filter
Top Products
9
3. Grasp the remaining grille block, allowing it to rest between the thumb and fore-
finger of each hand.
4. Pull firmly to stretch the grille cords, until the grille locator pins align with the
two grille holes on the top front of the loudspeaker.
On the Resolution C, stretch the grille cords to the right.
5. Gently guide the pins into the grille holes. You hear a click when the grille is in
place.
Detach the Loudspeaker Grille before You Move the Loudspeaker
1. Grasp the grille block (1) attached to the top front of the loudspeaker.
On the Resolution C, grasp the grille block attached to the right of the loud-
speaker.
2. Gently pull the grille block straight out until the grille locator pins slide out of the
grille holes.
3. Remove the grille block with the Krell logo (2) from the bottom front of the loud-
speaker.
On the Resolution C, remove the grille block from the left side of the loud-
speaker.
4. To protect the grille, place it in the grille box until you are ready to reinstall it.
Notes
Be careful not to scratch the loudspeaker cabinet with the grille locator pins.
Clean the grille periodically to remove accumulated dust. Gently wipe the grille from top to
bottom using a soft, dry, lint-free cloth. Do not use rubber conditioner or solvent.
(SECTION TWO: Unpacking and Placement continued)
Krell Resolution 1, 2, 3, and C Loudspeakers