Filter
Top Products
B. UNPACKING AND ASSEMBLY
NOTE: Do to the extreme weight of the MDA-300 or
MDA-500 it is strongly advised that unpacking and
placement is completed by at least two individuals.
1. Open the box on one end.
2. Fold back the flaps on all four sides of the box and
carefully roll it over on to the exposed end.
3. Pull the box straight up and off exposing the foam
packing material.
4. Pull the foam piece from the exposed end of the ampli-
tier.
5. Roll the amplifier carefully onto its handles and re-
move the second piece of foam.
The following items will now be visible in each box:
1
MDA-300/500 monaural amplifier
1 Warranty card
1
AC power cord
4 or 5 Rubber bottoms (MDA-500 has 5 feet)
NOTE: If any of these items are not included please
contact your authorized dealer immediately f6r assis-
tance.
6. Remove the plastic bag from the amplifier.
7. Repeat procedure for the second amplifier.
NOTE: Save all pac.kin~g materials..If you must ship your
MDA-300/500s in the tuture, repack the unit in its origi-
nal packaging to prevent transit damage.
CAUTION: Do not connect the power cords into the AC
mains before completing the Installation section.
4