Filter
Top Products
ABOUT THE OWNERS
~
MANUAL
The KSP-7B Owner’s Manual is divided into various groups of information.
The purpose of he document as a whole is to familiarize you with the unit
and guide you through its set-up, installation and operation in a logical
progression. The Table of Contents is as follows:
A. Unpacking
B. Phono Section Set-Up
C. Installation: 1. Cautions
2. Unit Location Guidelines and Installation
3. Connection of Inputs and Outputs
4. Turn-on of the Preamplifier
D. Operation
E. Warranty and Service Information
A. UNPACKING
Remove the KSP-7B, power supply and accessories from the shipping
container. Store all packing materials in a cool, dry place for future use.
Inspect the unit for shipping damage; if any damage is evident, contact
your dealer immediately. If the unit is in proper condition, proceed with
installation.
In addition to the preamplifier and power supply, you will find a small "L"
shaped allen driver. This is used to remove the top cover to gain access to
the phono section gain and input impedance loading adjustments.
Set-up of the phono section should be completed before installation of the
preamplifier.
B. PHONO SECTION SET-UP
Important Note: For the initial adjustment of the phono section the KSP-7B
should not be connected to its power supply. For adjustments to the phono
section input impedance after the initial set-up, as discussed below, please
note the following: Never adjust an_v of the.. internal switches while the
amplifier the KSP-7B is driving is turned on.