Filter
Top Products
BASIC INSTALLATION
4. Connect additional amplifiers as described in step 3.
5. When the cables are all in place, point the remote control at the amplifier
designated as Master and press the Power button. The amplifiers will all turn
on at the same time.
The meter display for each amplifier may vary. Manually change the meter
display via the front panel until all of the meters match. The amplifier will
remember the meter setting when cycled On/Off via the remote control or
front panel switch. If the unit is unplugged the memory will not remain and
the meters may need to be resynchronized. When linked and synchronized
correctly, ON/OFF and meter functions will happen simultaneously only
when the remote control is used.
NOTE: Each individual amplifier canbe turned ON/OFF and have meter
functions changed via the front panel separately. If you change an individual
amplifier’s function, it needs to be manually changed back to follow the
functions of the other amplifiers so the synchronization remains intact.
NOTE: Contact your dealer or KRELL Industries to obtain remote cable
links.
PAGE 8