Filter
Top Products
12
Krell KAV–2250 and KAV–3250
Connecting the Amplifier,
continued
4. Connect the loudspeaker cables to the amplifier channel output binding posts
located on the back panel, (8) on the KAV–2250 or (9) on the KAV–3250.
The binding post terminals accept spade lugs, bare wire, or pins. Use the red
terminal for the positive connection and the black terminal for the negative
connection.
IMPORTANT
Tighten loudspeaker binding posts by hand only.
5. Plug the end of the AC power cord into the IEC power connector.
The amplifier is now ready for operation. See
Amplifier Operation,
on page 13. You
can also reconfigure the amplifier for Multi Amp Throughput or bridged operation. See
Reconfiguration Options for the KAV–2250 and the KAV–3250,
on page 15.