Filter
Top Products
Unpacking
Open the shipping box, which contains:
1 amplifier unit (packed in foam end-caps)
2 ribbon connection cables
KAV-250a fuses:
2 AGC-8 (~ ’amp)
1 slow-blow (20 amp for 100/120 V or 12 amp for 220/240 V)
or
KAV-250a/3 fuses:
3 AGC-.8 ~ amp)
1 slow-blow (20 amp for 100/120 V or 12 amp for 220/240 V)
1 12 VDC output (12 V trigger) cable
1 IEC connector (AC power) cord
1 T-15 Torx wrench
1 packet containing the owner’s reference manual and the warranty registration
card.
Grasp the underside of the foam end-caps that encase the amplifier and lift the
amplifier straight out of the shipping box.
Place the amplifier in a safe location and remove the protective plastic wrapping.
Notes
If any of these items are not included in the shipping box, please contact your
authorized Krell dealer, distributor, or Krell for assistance.
Save all packing materials. If you ship your amplifier in the future, repack the unit in its
original packaging to prevent trans# damage. See Return Authorization Procedure,
on page 29, for more information.
2
KAV-250a and KAV-250aJ3 Amplifiers