Filter
Top Products
32
Display
This function enables you to turn on the front panel display (3) all the time, or turn
it off after a time out. The options are:
ON, TIMED.
Enter the menu, then:
1. Use the level control knob on the preamplifier front panel or the up and down
keys on the remote control (14) to select:
DISPLAY.
2. Press the enter button on the preamplifier front panel or the enter key (6) on
the remote control
. The front panel display (3) reads: MODE.
3. Press the enter button or key (6) again. The front panel display shows the
default mode:
ON.
4. Use the level control knob or the up and down keys to select the desired
option:
ON or TIMED.
5. Press the enter button or key to confirm the selection. The front panel display
reads:
MODE.
6. Use the level control knob or the up and down keys to select: BRIGHTNESS.
7. Press the enter button or key. The front panel display shows the default mode:
HIGH.
8. Use the level control knob or the up and down keys to select the desired
brightness:
OFF, LOW (25%), MED (50%), or HIGH (100%).
9. Press the enter button or key to confirm the selection. The front panel display
reads:
BRIGHTNESS.
ON
The front panel display is always on.
TIMED
The front panel display times out after 5 seconds.
BRIGHTNESS
Controls the brightness of the display. When the brightness setting is OFF, the
display is at 50% of brightness when in menu mode, and turns completely off
when you leave the menu mode.
(SECTION SEVEN: Customizing the Evolution 222 continued)
5 Menu Button or Key
Enter or exit the menu.
14 Volume Knob
or Level Keys
Navigate the menu hierarchy;
review functions and configu-
ration options.
6 Enter Button or Key
Select a configuration option;
confirm a selection.
BACK
Scroll backwards through the
menu hierarchy; exit a menu
option without confirming it.