Filter
Top Products
29
Customizing the Evolution 222
The Evolution 222 preamplifier easy-to-use menu allows you to configure the fol-
lowing functions. You can also use the menu to review version information about
the software, hardware, and firmware installed in the Evolution 222:
AC Mains,
page 30 Input Phase, page 35 Recall, page 39
Balance (channel) page 31 Input Trigger, page 35 RS-232 Control, page 40
Balance (input trim), page 31 IR Out Control, page 36 Save, page 40
Display, page 32 Link Control, page 37 Theater Mode, page 41
Info, page 33 Mute, page 37 Volume Display, page 42
Input Level Trim, page 34 Output Trigger, page 38
Input Name, page 34 RC-5 Control, page 39
Navigation Conventions
Navigating the Evolution 222 menu is straightforward and consistent throughout,
using four functions and the menu option
BACK.
5 Menu Button or Key
To enter the menu, press the menu button on the preamplifier front panel or the
menu key on the remote control. Once you are in the menu, you can press the
menu button or key to exit the menu.
14 Volume Knob or Level Keys
Use the volume knob on the preamplifier front panel or the up and down keys on
the remote control to scroll forward and backward through the menu hierarchy.
Each menu list is a continuous loop.
6 Enter Button or Key
Press the enter button on the preamplifier front panel or the enter key on the
remote control to select a function or a configuration option, and to confirm a
selection.
3 Front Panel Display
The display shows the active function and configurable options.
BACK
Select back to scroll backwards up the menu hierarchy, or to exit a menu option
without confirming it.
The first list you see in the menu is the list of configurable functions. Select a con-
figurable function to view a submenu: the list of options that configure the func-
tion. You can configure some options as well, using a second submenu.
SECTION SEVEN
continued