Filter
Top Products
Q. How do I gain access to a specific index with in a
track?
A. Start the disc playing and press the Scan Forward
button until the next sequential index number appears in
the display under the index column.
Q. I own many CD’s which have CD Rings on them. Am
I able to use these dises with the CD-1 ?
A. Yes, the CD-1 will accept discs with "CD Rings". Due
to their very low mass they will not damage the
,
CD-1 transport. While we can neither affirm or deny tlae
benefits derived from the use of CD Rings, we do not
fee! tlaat any type of disc equilibrium device is required
wim the CD-L
Q. Do you recommend the use of "Cones" or other damp-
ing feet with the CD-1 ?
A. Due to the rigid chassis construction and internal,
damping we do not feel the CD-1 requires additional
mass coupling or isolation. If you wish to use an after-
market isolation device you may do so without fear of
damaging the CD-1. However, any. device which affixes
permanently to the chassis or requires a breach of the
external chassis will void the warranty.
Q. Can I use an external Digital to Analog converter with
the CD-1 ? If so which output should I use, coax or fibre
optic?
A. Yes, the CD-1 can be used as a CD transport. While a
high~ quality, coaxial or standard Tosh link interface will
pertorm quite well, we recommend AT&T glass fibre
optic cabIe due to its ability, to completely 1,solate the
grounding planes between tlae transport and processor, its
resistance to RF interference and wide bandwidth format.
p~. Can I restart a program from its beginning while it’s
aying?
A. Yes, press the PREV button until you reach the first
track of the.program then press the Play button. The
program will start from the beginning.
10