Filter
Top Products
Connecting the VS-66H3 6x6 HDMI Matrix Switcher
KRAMER: SIMPLE CREATIVE TECHNOLOGY
10
6 Connecting the VS-66H3 6x6 HDMI Matrix Switcher
To connect
1
Figure 3
the VS-66H3 6x6 HDMI Matrix Switcher as illustrated in
the example in :
1. Connect up to six
2
2. Connect the six
HDMI sources (for example, DVD players) to the
IN HDMI connectors.
3
3. If required, connect a PC/controller to the RS-232 port (see
Section
OUT HDMI connectors to up to six HDMI acceptors
(for example, LCD displays with built-in speakers).
7.4) and/or the Ethernet port (see Section 7.6).
4. Connect the device to the mains electricity (not shown in
Figure 3).
5. If necessary, acquire the EDID (see Section
7.2)
Figure 3: Connecting the VS-66H3 6x6 HDMI Matrix Switcher
1 Switch off the power on each device before connecting it to your VS-66H3. After connecting your VS-66H3, switch on its
power and then switch on the power on each device
2 You do not have to connect all the sources
3 You do not have to connect all the outputs