Filter
Top Products
Defining the VS-66H3 6x6 HDMI Matrix Switcher
7
Figure 2: VS-66H3 6x6 HDMI Matrix Switcher Rear Panel
Table 2: VS-66H3 6x6 HDMI Matrix Switcher Rear Panel Features
#
Feature
Function
13 OUTPUT HDMI Connectors (1 to 6) Connect to up to 6 HDMI acceptors
14 INPUT HDMI Connectors (1 to 6) Connect to up to 6 HDMI sources
15 RS-232 9-pin D-sub Serial Port Connector Connect to a PC/serial controller
16 ETHERNET RJ-45 Connector Connect to a PC via a LAN
17 ETH RESET Button Press to reset to the factory default IP parameters
1
18
REMOTE IR Opening
2
Connect to an external IR receiver for controlling the device via an IR remote controller (see
Section
4.1)
19 Mains Power Connector Connect to the mains power
20 Mains Power Fuse Fuse for protecting the device
21 Mains Power Switch Switch for turning the device on or off
1 First turn the VS-66H3 off and then turn it on again while pressing the ETH RESET button. The device will power up and load its memory with the factory default IP parameters
2 Covered by a cap. The 3.5mm jack at the end of the internal IR connection cable fits into this opening