Filter
Top Products
Overview
KRAMER ELECTRONICS, LTD.
2
3 Overview
The high quality PT201VGA 2x1 VGA Switcher is a micro-sized mechanical
switcher designed for VGA/XGA/UXGA signals using high-density 15 pin HD
connectors. The PT201VGA:
Accepts 2 inputs and lets you select either input using a switch located on
the front panel
With its passive design, eliminates the need for a power supply, and
makes it possible to operate “backwards” (as a 1x2 switcher), by taking a
single input and toggling between two displays
Has high quality switching components and careful circuit design, ensuring
very high bandwidth exceeding 1200 MHz (1.2GHz!) and minimal crosstalk
Achieving the best performance means:
Connecting only good quality connection cables, thus avoiding
interference, deterioration in signal quality due to poor matching, and elevated
noise levels (often associated with low quality cables)
Avoiding interference from neighboring electrical appliances that may
adversely influence signal quality and positioning your Kramer PT201VGA in
a location free from moisture and away from excessive sunlight and dust
4 Your PT201VGA 2x1 VGA Switcher
Figure 1 and Table 1 define the PT201VGA 2x1 VGA Switcher:
Figure 1: PT201VGA 2x1 VGA Switcher
Table 1: Features and Functions of the PT201VGA 2x1 VGA Switcher
# Feature Function
1 INPUT 1 HD15F Connector Connects to the video source 1
2 INPUT 2 HD15F Connector Connects to the video source 2
3 OUTPUT HD15F Connector Connects to the video acceptor
4 SELECT Switch Push in to select input 1; release to select input 2