Filter
Top Products
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your FC-4046 Video MultiCoder®
4
Table 1: Front Panel FC-4046 Video MultiCoder® Features
# Feature Function
1 POWER Switch Illuminated switch for turning the unit ON or OFF
2 STANDARD LEDs Indicates
1
the input video standard
2
, lighting the appropriate LED
3 INPUT Button Press to choose the input format
3
4 INPUT LEDs Light the specific INPUT chosen via the INPUT button
5 OUTPUT Button Press to select the output standard on CV and YC outputs
6 OUTPUT LEDs Light the specific OUTPUT chosen via the OUTPUT button
7 COMPONENT OUT
Button
Press to select the output
4
format on the component BNC connectors
8 COMPONENT OUT LEDs
Light the specific COMPONENT OUT chosen via the COMPONENT OUT
button
9 Lower CONTROL LED Selects the function printed under the lit ProAmp button
10
Upper CONTROL LED Selects the function printed above the lit ProAmp button
Y CONTROL Button 11
BRIGHT Button
U CONTROL Button 12
CONTRAST Button
V CONTROL Button 13
SATURATION Button
SHARP CONTROL Button 14
HUE Button
Press the appropriate button once or twice (until the upper/lower LED is lit)
to select control of the Y / BRIGHTNESS / U / CONTRAST / V /
SATURATION / SHARP / HUE
5
. Adjust using the + and – buttons
15
+ Button Press to increase the level
6
16
- Button Press to decrease the level
6
17
7-segment Display Displays data when selecting a CONTROL button. After powering up the
machine, the firmware version number displays briefly for versions higher
than 1.0
18
PANEL LOCK LED Lights when the panel is locked (blinks after pressing a button while the
panel is locked)
19
PANEL LOCK Button Disengages the front panel buttons
1 When the FC-4046 is set to the Automatic mode
2 PAL (B/D/G/H/I/N), NTSC(3.58), SECAM, PAL (M/Nc/60) and NTSC (4.48)
3 CV, YC, YUV, RGsB, or RGBS
4 YUV, RGsB, or RGBS
5 Note that this function is not applicable to all standards
6 Operational only when the 7-segment display displays data after choosing a control button