Kramer Electronics COBRA R500-2 Stereo Receiver User Manual


 
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Overview
2
3 Overview
CAT 5/5e/6 cabling for this product must be pinned to the TIA-EIA T568B
wiring specification (see appendix A). We also highly recommend that all
CAT 5 cables be pre-terminated and tested. Cables terminated on-site or in an
existing infrastructure should be tested before use to ensure compliance with
the TIA-EIA T568B specification. Using incorrectly terminated CAT 5 cables
can damage this product.
We recommend using our Kramer Cobra ultra low skew cable—BC-HDTP
(solid bulk) or BCP-HDTP (solid plenum bulk)—available in lengths of 700'
(210m) and 1300' (390m).
Our Kramer Cobra series products are compatible with CAT 5/5e/6 data
cabling as well as skew free CAT 5/5e cabling manufactured for video
applications. Note that some skew free CAT 5 is specific to a particular
vendor and is not compatible with our products. Ensure any skew free CAT 5
cable is non-proprietary prior to purchase / installation. CAT6 cable, due to
the manufacture method, can exhibit much greater skew than standard CAT
5/5e and may require skew compensation beyond what the standard product
offers. Contact Kramer Electronics for assistance.
Achieving the best performance means:
Connecting only good quality connection cables, thus avoiding
interference, deterioration in signal quality due to poor matching, and
elevated noise levels (often associated with low quality cables)
Avoiding interference from neighboring electrical appliances that may
adversely influence signal quality and positioning your Cobra R500A /
R500-2 in a location free from moisture and away from excessive sunlight
and dust
Caution – No operator-serviceable parts inside unit.
Warning – Use only the Kramer Electronics input power
wall adapter that is provided with this unit
1
.
Warning – Disconnect power and unplug unit from wall
before installing or removing device or servicing unit.
Warning –This equipment is not intended for, nor does it
support, distribution through an Ethernet network. Do not
connect these devices to any sort of networking or
telecommunications equipment!
1 For example: model number AD2512C, part number 2535-000251