Filter
Top Products
- 9 -
Special connection examples
PC as transmission source
You can transmit video signals from your
PC if the PC has a graphics card with
VIDEO output.
For sound, use the 3.5 mm mini-stereo
to CINCH female AUDIO adapter (2$).
Connect the transmitter (e) to the video
output of the graphics card.
Note:
Make certain that your PC is correctly
congured for outputting video on the
graphics card.
Television as transmission source
If video signals can be output via an AV
socket on your TV, then the TV can be
used as a transmission source.
Please consult the operating manual of
your TV for more information.
Connect the transmitter (e) to an AV
socket that may be used as an output.
Note:
Please note that most TVs must be
switched on for a signal to be output
on the AV socket. Image and sound
information coming from the TV can
then be transmitted.
VCR as transmission source
(Transmission of an audio/video signal,
e.g. cable connection).
Note:
You can use the VCR as a tuner for
transmitting audio/video signals.
You can also switch the cable chan-
nels using the VCR.
Connect your VCR to a "cable connec-
tion". Program your video recorder for
your "cable connection".
Please consult the operating manual of
your VCR for more information.
Then connect the transmitter (e) of the
radio transmission set to the AV socket
of your VCR. Switch on the VCR.
The VCR will transmit the congured "cable
channels" to the transmitter (e) via the
AV socket.
Switch the "cable channels" on the re-
ceiver (f) using the remote control of
the VCR.
Channel conguration
(parallel operation)
Note:
The data/signals sent from the trans-
mitter are not encrypted. This means
that compatible devices within the
reception range are capable of
eavesdropping on the signal. The
radio transmission set uses an "open
standard".
Select between 4 dierent channels.
Note:
This makes it possible to operate up
to 4 transmitters (e) in the same area.
Make certain that the transmitter (e)
and receiver (f) are set to the same
channel.
Expansion options
Expand the radio transmission set by
connecting multiple transmitters (e) or
receivers (f).