Filter
Top Products
11
Handling and operation
SKRD 30 A1
GB
CY
Handling and operation
In this section you receive important information for the handling and operation
of the device.
Switching On and Off
After the device has been connected to the power supply it is already switched
on. Via the On/Off
4
button you switch between the operational modes clock/
standby operation and radio.
NOTICE
The On/Off switch ►
4
does not disconnect the device completely from the
mains power. To completely disconnect the device from the mains power
the mains power cable plug
16
must be pulled from the mains socket.
Basic settings
After the device has been connected to the mains power supply it shows the time
of day and the day of the week in the display
3
. The device is in the operational
mode clock/standby operation.
Activating the settings menu
To activate the settings menu, whilst in the operational mode clock/standby operation,
press the Bass/AMS/Mode
7
button. The time of day, shown in the display
3
,
begins to blink. Each further actuation of the Bass/AMS/Mode
7
button switches
to the next setting potential. The menu item sequence is:
Setting the time of day ▯
Setting the date ▯
Adjusting the display brightness ▯
Setting the memory function ▯
Setting the time of day format ▯
NOTICE
The setting menu ends automatically if you do not actuate any buttons for ►
approx. 15 seconds. The executed setting is saved.