Filter
Top Products
- 8 -
Setting FM stereo reception
• During FM reception press the button STOP/ST./
MO (FM MODE ST.MO. on the remote control) in order
to turn on the stereo playback. If the radio pro-
gramme is received at full strength in stereo, the
display STEREO will be shown.
Note:
If the FM stereo signal is too weak, you might be
able to improve the reception by pressing the button
STOP/ST./MO again. The display STEREO will be
extinguished. In this setting, the sound will be played
back in mono.
CD/MP3 Functions
• Press the button CD/MP3 in order to switch to
Audio-/ MP3-Disc playback.
• The display briefly shows the message "Cd",
if no disc is inserted into the disc compartment,
NOd, will be displayed.
After approximately five seconds, the time is
displayed again.
• In order to switch between disc and time display
press the pushbutton
DISPLAY.
Inserting a CD
1. Push down on the cover of the disc compartment
marked “PUSH TO OPEN/CLOSE ” and quickly
release it. The flap of the CD compartment
opens upwards. OP will be displayed.
2. Insert the CD into the centre of the CD compart-
ment with the printed side facing up. Please
ensure that the CD is perfectly centered on the
turntable.
3. To close the disc compartment, press down on
“PUSH TO OPEN/CLOSE” until it latches. After
a short flash „- - --“ on the display, the number
of titles on the CD is displayed. If a MP3 CD is
used, the additional message MP3 will be
displayed.
Removing the CD
Push the button STOP/ST./MO (STOP on the remote
control) and wait until the CD stops turning.
Note:
The CD should no longer be spinning when you
open the CD compartment. It could be irreparably
damaged.
1. Push down on the cover of the disc compartment
marked “PUSH TO OPEN/CLOSE” and quickly
release it. The flap of the CD compartment
opens upwards. OP will be displayed.
2. Remove the CD.
Playback functions
Starting playback
• Press the button PLAY/PAUSE. In the display is
shown and the first song is played. After that, the
actual title number is indicated.
Stopping the play function
Press the button STOP/ST./MO (STOP on the remote
control).
Interrupting/continuing playback
In the display the symbol and the title are flashing.
• To continue playback, press the button
PLAY/PAUSE
once again.
Next/previous title
• In order to play back one of the next CD's songs,
keep pressing the button
NEXT ( on the remote
control) until the number of the desired title appears.
IB_KH2306_AR23605_LB6 18.08.2008 16:23 Uhr Seite 8