Filter
Top Products
4
Introduction: Thank you for your purchase of a Knoll CI6 12 channel
controller amplifier and congratulations on your choice. The CI6 features six
deluxe digital volume controlled stereo amplifiers with individual seven source
selection. This is Knoll's fourth generation of multi-channel, high-quality
power amplifiers. The CI6 is designed to meet the amplifier needs of custom
installed multi-zone systems where high quality sound is a specific
requirement.
Each of the six zones or rooms can select any of the seven inputs, with
individual volume control, bass, treble and balance. Extras such as an
external voltage trigger that can turn source equipment on and off, individual
zone infrared outputs, a fully balanced paging override, RS232 control, fully
buffered line level outputs and many more features give the CI6 exceptional
value when installed in homes and large complex systems. Except for the
power button all controls are rear mounted. A data port is provided for
ganging multiple CI6's. Infrared signals can be relayed from the keypads to
the source equipment.
The CI6 is normally controlled by MR164 or MR166 long distance LCD
keypads with or without Knoll remote controls or RS232 commands from
whole house controllers. The paging override is normally used for whole
house announcements or doorbell chimes.
with seven input source selection. Selection, volume level, bass, treble and
balance is made on MR164 keypads, Knoll remote control (or a programmed
remote control) or via an external controller. Rooms can have different
source selections, volumes, etc.
require a MR164 keypad, RB12 remote control or external controller via
RS232. The keypads are typically mounted in the room with the speakers and
they control amplifier power on/off, volume up/down and mute as well as
source selection.
CI6 consists of a total of 12 power amplifiers
in one 3-1/2" high enclosure (two rack spaces). Each power amplifier channel
can deliver 50 watts RMS with peaks of 100 watts. Because of its unique
design the CI6 delivers exceptional value.
CI6 amplifier channel is individually
and fully protected against low impedance, overheating, overloading, over
voltage and under voltage. The protection circuitry automatically restores the
amplifier channel as soon as its parameter returns to the safe operating area.
adjustment. Each channel features
adjustments so installers can preset the room for speaker differences and
listener preferences.
CI6 can turn on and off source components with its
12vdc trigger output.
64 keypad features all zone control of all off, all
zones to any one source (then set volume at 1/3) and all zones volume up or
down.