Filter
Top Products
SPECIFICATIONS
• Weight 13 lbs. ea.
• Dimensions 8.5" H x 7.250" W x 14.0" D
• Circuit type Single ended Class A Triode
• Power output 2.3 watts RMS into 4 ohms
• 5 watts RMS into 8 ohms when bridged
• NOTE: Power increases as ohms decrease
• Stable into 1 ohm speaker loads
• Input voltage 2.0 volts for full output
• Noise / Hum Less than 1.5 millivolts (amazing for tube gear)
• Response 20 Hz ~ 20 kHz
• Feedback ZERO negative feedback used
• Rectification 5U4G tube rectification
• Output tubes SV83, 6P15P-EV, 6n15n-EB or EL84/6BQ5
• Signal tube 6N1P or 6922 or 6Dj8
• Transformers All transformers are custom made for this amplifier by Decware
• Biasing Self-Biasing circuit - never needs adjustment
• Resistors All resistors are precision WW/MF by DALE, VISHAY
• Signal Cap Film and Foil
• Filter Caps All filter caps are US made SPRAGUE/ATOM
• AC cord Fused IEC connector provided with removable power cord
• Consumption 65 watts at full power
• Input jacks RCA type 24K Gold / Teflon
• Output jacks Gold 5-way binding posts accept 8 gauge wire
• Speaker dB/1w 89 dB minimum / 96 dB is ideal
• Warranty Lifetime to original owner / 90 days on tubes