Filter
Top Products
10
KSW 300
Type: 15" bass reflex, tuned port enclosure
Amplifier: 300 watts continuous into 4 ohms
Auto Power On: 2 second ON delay, 15 minute OFF delay
Frequency Response: 25-120 Hz±3 dB
Maximum Output: 112 dB
Audio/Video Switch: +3 dB over entire frequency range
Low Pass Crossover: Continuously variable from 40-120 Hz,
24 dB/octave slope above 120 Hz.
High Pass Crossover: Main speakers: line level outputs with
switchable high pass between 40 and 80 Hz, 6 dB/octave slope
above 120 Hz. Speaker level outputs with fixed high pass at
100 Hz, 6 dB/octave
slope.
Phase: Switchable 0-180 degrees
Inputs/Outputs: Line level RCA phono jacks. Dedicated LFE
channel input. High level speaker terminals.
Drive Component: K-1061-K 15" (30.5 cm) driver
Weight: 76 lbs. (34.54 kg)
Height: 19.5" (49.53 cm)
Width: 19" (48.26 cm)
Depth: 19" (48.2 6cm)
Cabinet: Medium density fiber board construction (MDF)
Finish: Matte finish black vinyl
Voltage: 110/120 VAC 60 Hz – Export Version 230 VAC 50/60 Hz
Component Specifications
KSW 200
Type: 12" bass reflex, tuned port enclosure
Amplifier: 200 watts continuous into 4 ohms
Auto Power On: 2 second ON delay, 15 minute OFF delay
Dynamic Headroom: 1 dB (250 watts into 4 ohms)
Frequency Response: 29-120 Hz±3 dB
Maximum Output: 108 dB
Audio/Video Switch: +3 dB over entire frequency range
Low Pass Crossover: Continuously variable from 40-120 Hz,
24 dB/octave slope above 120 Hz.
High Pass Crossover: Main speakers: line level outputs with switch-
able high pass between 40 and 80 Hz, 6 dB/octave slope above
120 Hz. Speaker level outputs with fixed high pass at 100 Hz,
6 dB/octave slope.
Phase: Switchable 0-180 degrees
Inputs/Outputs: Line level RCA phono jacks. Dedicated LFE
channel input. High level speaker terminals.
Drive Component: K-1050-K 12" (30.5 cm) driver
Weight: 69 lbs. (31.3 kg)
Height: 18.75" (47.63 cm)
Width: 17.5" (44.5 cm)
Depth: 17.5" (44.5 cm)
Cabinet: Medium density fiber board construction (MDF)
Finish: Matte finish black vinyl
Voltage: 110/120 VAC 60 Hz – Dual Voltage Export Version
230/120 VAC 50/60 Hz
KSW 150
Type: 10" bass reflex, tuned port enclosure
Amplifier: 150 watts continuous into 4 ohms
Auto Power On: 2 second ON delay, 15 minute OFF delay
Dynamic Headroom: 1 dB (190 watts into 4 ohms)
Frequency Response: 31-120 Hz±3 dB
Maximum Output: 104 dB
Audio/Video Switch: +3 dB over entire frequency range
Low Pass Crossover: Continuously variable from 40-120 Hz,
24 dB/octave slope above 120 Hz.
High Pass Crossover: Main speakers: line level outputs with switch-
able high pass between 40 and 80 Hz, 6 dB/octave slope above
120 Hz. Speaker level outputs with fixed high pass at 100 Hz,
6 dB/octave slope.
Phase: Switchable 0-180 degrees
Inputs/Outputs: Line level RCA phono jacks. Dedicated LFE
channel input. High level speaker terminals.
Drive Component: K-1049-K 10" (25.4 cm) driver
Weight: 48 lbs. (21.8 kg)
Height: 16.25" (41.28 cm)
Width: 15" (38.1 cm)
Depth: 15" (38.1 cm)
Cabinet: Medium density fiber board construction (MDF)
Finish: Matte finish black vinyl
Voltage: 110/120 VAC 60 Hz – Dual Voltage Export Version
230/120 VAC 50/60 Hz
KSW 100
Type: 8" bass reflex, tuned port enclosure
Amplifier: 100 watts continuous into 4 ohms
Auto Power On: 2 second ON delay, 15 minute OFF delay
Dynamic Headroom: 1 dB (125 watts into 4 ohms)
Frequency Response: 34-120 Hz±3 dB
Maximum Output: 101 dB
Audio/Video Switch: +3 dB over entire frequency range
Low Pass Crossover: Continuously variable from 40-120 Hz,
24 dB/octave slope above 120 Hz.
High Pass Crossover: Main speakers: line level outputs with switch-
able high pass between 40 and 80 Hz, 6 dB/octave slope above
120 Hz. Speaker level outputs with fixed high pass at 100 Hz,
6 dB/octave slope.
Phase: Switchable 0-180 degrees
Inputs/Outputs: Line level RCA phono jacks. Dedicated LFE
channel input. High level speaker terminals.
Drive Component: K-1048-K 8" (20.32 cm) driver
Weight: 39 lbs. (17.7 kg)
Height: 14.75" (37.47 cm)
Width: 13.5" (34.3 cm)
Depth: 13.5" (34.3 cm)
Cabinet: Medium density fiber board construction (MDF)
Finish: Matte finish black vinyl
Voltage: 110/120 VAC 60 Hz – Dual Voltage Export Version
230/120 VAC 50/60 Hz
KSW 50
Type: 8" bass reflex, tuned-port enclosure
Amplifier: 50 watts continuous into 4 ohms
Auto Power On: 2 second ON delay, 5 minute OFF delay
Dynamic Headroom: 2 dB (80 watts into 4 ohms)
Frequency Response: 41-120 Hz±3 dB
Maximum Output: 97 dB
Audio/Video Switch: +3 dB over entire frequency range
Low Pass Crossover: Continuously variable from 40-140 Hz,
24 dB/octave slope above 120 Hz.
High Pass Crossover: Main speakers: line level outputs
with fixed
high pass filter, 6 dB/octave slope above 120 Hz.
Speaker level
outputs with fixed high pass at 120 Hz, 6 dB/octave slope.
Phase: Switchable 0-180 degrees
Inputs/Outputs: Line level RCA phono jacks. High level speaker
terminals.
Drive Component: K-1051-K 8" (20.3 cm) driver
Weight: 33 lbs. (15 kg)
Height: 13.25" (33.7 cm)
Width: 12" (30.5 cm)
Depth: 12" (30.5 cm)
Cabinet: Medium density fiber board construction (MDF)
Finish: Matte finish black vinyl
Voltage: 110/120 VAC 60 Hz – Dual Voltage Export Version
230/120 VAC 50/60 Hz