Filter
Top Products
4
Specifications
Performance
Model: DC10 DC12 TC10
Nominal Impedance [Zn], ohm [per enclosure]
Resonance Frequency [fb or fo], Hz
Sensitivity [SPLo], dB @ 1W, 1m
Effective Excursion [EXmax™], in (mm)
Power Handling Watts, Peak (RMS)
Enclosure Top Surface Depth, in (cm)
Enclosure Bottom Surface Depth, in (cm)
Enclosure Height, in (cm)
Enclosure Width, in (cm)
2 or 4
38
99.9
.38 (9.76)
600 (300)
13 15/16 (35.3)
17 5/16 (43.9)
16 (40.6)
31 15/16 (81.0)
2 or 4
40
98.4
.38 (9.76)
600 (300)
13 7/16 (34)
16 7/16 (41.7)
14 (35.5)
28 (71.1)
4
47
93.8
.38 (9.76)
300 (150)
5 (12.7)
8 5/8 (21.9)
15 (38.1)
21 1/2 (54.6)
Measurements are based on the 4 ohm enclosures. Note: The use of a subsonic filter will significantly increase the power handling.
The power handling specifications in this chart are calculated using a 25 Hz, 24 dB per octave subsonic filter.
Comp Subwoofer Enclosures
Front mounting, speaker faces rear of vehicle
Rear mounting, speaker faces front of vehicle
Figure A
Front of
Vehicle
At least 4”
At least 4”
Figure B
Front of
Vehicle
At least 4”
DC
DC