Filter
Top Products
Wiring Options
Installation
9
There are three sets of wires supplied with the Kicker KS-Series System Components. One set has two different size female
connectors .205” (5.2 mm) and .110” (2.8 mm) and is designed to plug on to the terminal of the midrange. The other end of this wire
goes to the midrange output on the supplied crossover.
The other two sets of wires do not have any connectors on either end. One set goes from the tweeter output of the crossover to the
short wire coming out of the tweeter; join these wire with the supplied butt connectors. The last set of wires are used to join the inputs
of the crossover to the outputs of your source unit or amplifier. Please see Figure 5.
Tweeter
Midrange
Butt
Butt
Connectors
Connectors
+
_
+
_
107.5 FM THE END
+
_
+
_
SOURCE UNIT or AMPLIFIER
Figure 5
KS-Series System Components
If you have any questions about the installation of your Kicker
KS-Series System Component Speakers, see the Authorized
Kicker Dealer where you made your purchase. For more advice
on installation, click on the SUPPOR
T tab on the Kicker
homepage, www.kicker.com. Choose the T
echnical Support tab,
choose subject you are interested in, and then download or view
the corresponding information. Please E-mail
support@kicker
.com or call Technical Services (405) 624-8583
for specific or unanswered questions.