Kenwood XD-6550 Stereo System User Manual


 
XD-8550/XD-6000 (En/T)
58
Preparation sectionBasic sectionApplication sectionKnowledge sections
3
1
Start edit recording.
Select the disc.
2
Go to step 3 before playback starts.
Recording preparations are required.
¤ ¤
¤ ¤
¤
For the reverse mode, select “
” ,“
[
”(two-way recording).
This function allows to record CD sound simultaneously
on a tape and MD. All tracks on a CD can be recorded in the
same order as they are recorded on the CD.
When recording sound from the MD recorder to a cassette
deck, be sure to read the instruction manual of the optional
MD recorder (DM-F70).
Twin recording
(For XD-8550)
Convenient CD recording
DISC SKIP
TWIN REC
÷The recording level and bias will be adjusted automatically in approx. 60
seconds (variable depending on CD contents), after which recording
starts.
÷The CD tracks are recorded in the order they are recorded on the CD.
÷The tape and CD stop automatically when recording has completed.
PGM
MEMO
EDIT RDS EON TA NEWS INFO. TP PTY TOTAL SPACE
AUTO
TUNED
DISC ALL
STEREO
kHz
MHz
MUTE
12
PROG.
N.B.
D1*)1**)):2
1
2
3
4
5
11
12
13
14
15
16
17
18
19
20
6
7
8
9
10
MAX
SLEEP O.T.T. ECHO P.B.C.
EQ.
ON
MANU.
Press so that the “PGM” indicator goes off.
Selected disc No.
P.MODE
PGM
MEMO
EDIT RDS EON TA NE
W
AUTO
TUNED
DISC ALL
STEREO
CD
*
MAX
SLEEP O.T.T.
Should be OFF.
CCRS
REC / ARM
1. When the TWIN REC key is pressed during playback of CD, the playback stops and the CCRS setting (preparing edited recording) starts.
2. The automatic recording level setting in the edit recording is based on a suitable section for recording level setting in the loaded CD.
3. If the deck is set for one-side recording (), the processing at the tape end is applied only on side A.
To end recording in the middle
÷ Both the cassette deck and CD player stop.
7
÷The recording input of the MD recorder is set automatically to “DIGITAL”.
During recording: X-H5
Blinks Lights
Notes
Notes
For XD-8550