Filter
Top Products
XD-750/700/550/500 (En)
52
Preparation sectionBasic sectionApplication sectionKnowledge sections
Adjust the clock before setting the timer.
Set the POWER switch to OFF (STANDBY) position.
Adjust the listening volume.
Make preparations for the play (recording).
÷When recording radio, the listening volume is automatically set to the
minimum volume at the moment the power is turned ON by the timer.
÷To listen to CD
Insert a disc.
(Program playback is not
possible.)
÷ To listen to tape
Set a tape into deck B.
÷Playing the auxiliary input
source
Make timer setting of
the component con-
nected to the AUX jacks.
÷For recording
Make prepara-
tions for record-
ing.
§
.......................................................................
.......................................................................
.......................................................................
.......................................................................
÷To listen to radio
The station should be
preset prior to the
above.
∞
Select the disc to be played
(1, 2 or 3).
÷Timer reservation is possible for the two types PROG.1 and PROG. 2
at the same time.
÷Please make reservations with an interval of at least one minute, so that
the operation times of PROG. 1 and PROG. 2 do not overlap.
Timer programming
Two 24-hour timer systems (PROG.1, PROG.2) (which can be used every day) and a sleep timer system (which works only
once) are available.
In each of PROG.1 and PROG.2, the timer data including the operating period and played contents can be set and selected to
be activated or not as required.
1
2
3
Adjust the clock before setting the timer.
The B deck has priority at
the time of timer playback.
A
Timer operation
Select a program No.
4
÷The selected program No. lights.
÷If a program No. under which a timer program has already been
reserved, it is replaced by the new timer program.
1
D
O
W
N
U
P
U
P
MULTI CONTROL
/
VOLUME
ON/STANDBY
2
Within 8 seconds!
ENTER
PROG.
AM1)))
1
:
Each press of the key switches the program numbers as follows.
1 PROG.1 ....... Program 1
2 PROG.2 ....... Program 2
3 Normal operation
EX.BASS