Kenwood XD-652 Stereo System User Manual


 
XD-SERIES (EN/M,T)
Application section
49
Recording preparations are required.
(Steps 1 to 4) ¤
Recording the programmed titles
(CD PROGRAM RECORDING)
Program the desired tracks from up to 3 CD discs in the desired order and record the programmed
playback onto tape.
Convenient CD recording
+Scrolled display (CD Program Recording)
To end recording in the middle
÷ Both the cassette deck and CD player stop.
+Scrolled display
(Press 'ENTER' to Start, 'JOG' to Check)
SELECT
M
U
L
T
I
C
O
N
T
R
O
L
ENTER
CmD Progra
&
^
PTress 'EN
÷ The program mode is maintained even after completion
of recording. To return to the normal mode, it is required
to cancel the program mode.
+Scrolled display (Recording Options) Lights
R ecording
The following items can be selected by turning the
MULTI CONTROL jog dial.
“CD Program Play”
“Recording Options”
“Audio Options”
“Clock Options”
“Surround Setup”
(Except for XD-7...series)
&
^
MENU
SELECT
M
U
L
T
I
C
O
N
T
R
O
L
1
Check that the CD player is in the
stop mode.
2
Select “Recording Options” .
3
Select “CD Program Recording”.
4
Program the desired tracks.
5
Start recording.
1 Select tracks in the order you want to
play them. (Perform step 3 on page 36.)
2 Check, replace, add or delete the pro-
grammed tracks as required.
(Perform step 4 on page 37.)
The following items can be selected by turning the
MULTI CONTROL jog dial.
“CD Direct Recording”
“CD Program Recording”
“Timer Recording”
If it is in play mode
Lights
XD-7...series : The equalizer or 3D surround effect applied to
the audio can be recorded together with it.
W
XD-6...series, XD-8...series : The equalizer effect applied to
the audio can be recorded together with it, but the effects obtained
by surround playback or DSP playback cannot be recorded to-
gether with the audio.
E