Kenwood XD-652 Stereo System User Manual


 
XD-SERIES (EN/M,T)
32
Basic section
1. Load a cassette tape.
(Recording is available on deck B only.)
2. Select the tape transport direction.
Let's record
Recording on TAPE
1 Open the door of deck B.
2 Insert a tape.
3 Close the door.
1 Select deck B by pressing the
A/B key.
2 Press the play key correspond-
ing to the desired direction.
3 Stop playback (by pressing the
& key).
To reverse the transport direction
÷ When recording is started, the
tape is transported in the direction
selected in this step.
÷ Wind the tape to the position
where recording is to be started.
Check the tape transport direction indicator.
3. Set the recording condition.
1 Select the reverse mode.
2 Select the DOLBY NR mode. (XD-7...series, XD-8...series only)
0
PUSH
OPEN
11
A
&
¡
#
¡
#
22
÷ The Tape Equalizer cannot be used in recording. (XD-6...series only)
Note that this cassette deck cannot record onto
Metal tapes.
NoteNote
Note
REV. MODE DOLBY NR
33
÷ Differentiation between normal
(TYPE
) and high (TYPE ) tape is
set automatically.
÷ Remove tape slack before load-
ing.
XD-6...series
XD-8...series XD-7...series
XD-6... series/XD-8... series
XD-7...series : The equalizer or 3D surround effect applied
to the audio can be recorded together with it.
W
XD-6...series, XD-8...series : The equalizer effect applied
to the audio can be recorded together with it, but the ef-
fects obtained by surround playback or DSP playback
cannot be recorded together with the audio.
E
R
D
S
11
55
33
44
22