Filter
Top Products
Preparation section
XD-SERIES (En)
9
1.Be sure to insert all connection cords securely. If their connections are imperfect, the sound may
not be produced or noise may interfere.
2.Before plugging or unplugging a connection cord, be sure to unplug the power cord from the wall
AC outlet. If connection cords are plugged or unplugged with the power cord left plugged in,
malfunction or damage may result.
Malfunction of microcomputer
If operation is not possible or erroneous display appears
even though all connections have been made properly,
reset the microcomputer referring to “In case of diffi-
culty”.
U
Twist
Speakers
Twist
Speaker Unit
Main Unit
System connection
Notes
Notes
Caution regarding placement
(Except for U.S.A., U.S.-Military and Canada)
Speaker and TV installation
If there is a magnet or other device generating magnetic
force nearby, interaction between the magnet and speaker
may cause color blotching on the TV. If this happens, move
the speaker at least 20 cm away from the TV set.
Speaker (left)Speaker (right)
Speaker cord
·ª ·ª
÷ Never short-circuit the “+” and “-” speaker cords.
÷ If the left and right speaker connections or the “+” and
“-” polarity are inverted, the sound will be unnatural with
unclear positioning of musical instruments, etc. Be sure
to connect them without mistake.
LS-N402
LS-N452
LS-N502
LS-N552
XD-402
XD-452
XD-502
XD-572S/XD-552
Speaker Model NameSystem Name
Be sure to adhere followings. Or proper ventilation will be blocked causing damage or fire hazard.
÷ Do not place any objects impairing heat radiation onto the top of unit.
÷ Leave a space around the unit (from the largest outside dimension including projection) equal or greater than, shown
below.
Top panel : 50 cm, Side panel : 10 cm, Back panel : 10 cm
+
-
+
-
FRONT
SPEAKERS
(
6-16Ω
)
R
L
−
+
−
+
1234
1234
Caution regarding placement
(For U.S.A., U.S.-Military and Canada)
Be sure to adhere followings. Or proper ventilation will
be blocked causing damage or fire hazard.
÷ Do not place any objects impairing heat radiation onto
the top of unit.