Kenwood XD-552 Stereo System User Manual


 
XD-SERIES (En)
44
Application section
Recording preparations are required.
(Steps 1 to 4)
1
Check that the CD player is in the
stop mode.
2
Select “Recording Options”.
3
Select “CD Direct Recording”.
4
Select the disc.
5
Start recording.
Recording of an entire CD
(CD DIRECT RECORDING)
Perform the following operation while the CD
player is in stop mode to start recording at the
same time as the start of playback.
When equalizer or another effect is applied
to the sound, the sound with the applied
effect can be recorded.
i
Convenient CD recording
÷ Recording of CD starts at the same time as playback.
÷ At the end of tape, the music is not recorded on the
leader tape portion. If you do not want any music to
be interrupted in the middle, refer to “Recording on
TAPE” and start recording of side B with the
interrupted track.
To end recording in the middle
÷ Both the cassette deck and CD player stop.
+Scrolled display (CD Direct Recording)
+Scrolled display (Select Disc No.)
+Scrolled display (Press 'ENTER' to Start)
SELECT
M
U
L
T
I
C
O
N
T
R
O
L
SELECT
M
U
L
T
I
C
O
N
T
R
O
L
ENTER
&
^
C D Direct
D isc No.1Sselect Di
PTress 'EN
+Scrolled display (Recording Options)
Lights
R ecording
The following items can be selected by turning the
MULTI CONTROL jog dial.
“CD Program Play”
“Recording Options”
“Audio Options”
“Clock Options”
MENU
SELECT
M
U
L
T
I
C
O
N
T
R
O
L
The following items can be selected by turning the
MULTI CONTROL jog dial.
“CD Direct Recording”
“CD Program Recording”
“Timer Recording”
&
^
If it is in play mode