Kenwood XD-452 Stereo System User Manual


 
XD-SERIES (En)
50
Application section
This unit incorporates a clock function. Be sure to adjust the correct time before using the timer func-
tion. The time is displayed only while the power is off.
1
Select “Clock Options”.
2
Select “Adjust Time”.
3
Enter the figure of hour.
4
Enter the figure of minute.
Clock adjustment
÷ The time display starts to blink.
÷ Press the SELECT key. The hour is entered and the
minute display starts to blink.
Example: Adjustment to 8:45
The following items can be selected by turning the
MULTI CONTROL jog dial.
“Sleep Time”
“Adjust Time”
“O.T.T.”
“Timer Play”
“Auto Power Save”
To decrease
the figure
To increase
the figure
Other countries
AM12ÔAM1ÔAM2...
PM1ÔPM2...ÔAM12 ...
00Ô01Ô02...59Ô00Ô01...
÷ Press the BACK key to return to the previous step and
restart operation from there.
÷ To adjust correct time, press the ENTER key at the same
moment as a time announcement.
To decrease
the figure
To increase
the figure
+Scrolled display (Clock Options)
Lights
(In standby mode)
÷ When the key is pressed while the “TIMER” indicator is
lit, the timer setup mode is displayed after the clock
display.
÷ The clock display blinks after the power cord has been
unplugged from the AC power outlet and plugged in
again or after a power failure. In this case, set the time of
the day again.
SELECT
(Displayed for approx. 5 sec.)
Cilock Opt
The following items can be selected by turning the
MULTI CONTROL jog dial.
(“CD Program Play”)
(“Recording Options”)
(“Tape Dubbing”)
“Audio Options”
“Clock Options”
Adjust the clock before setting the timer.
m 8:00a
m8:45a
For U.K., Europe and Russia
0Ô1Ô2...13Ô14...Ô0 ...
0 8:0
5 8:4
Other countriesFor U.K., Europe and Russia
To display the time
MENU
SELECT
M
U
L
T
I
C
O
N
T
R
O
L
SELECT
M
U
L
T
I
C
O
N
T
R
O
L
ENTER
M
U
L
T
I
C
O
N
T
R
O
L
SELECT
M
U
L
T
I
C
O
N
T
R
O
L