Filter
Top Products
XD-SERIES (En)
28
Basic section
1. Load a cassette tape.
(Recording is available on deck B only.)
2. Select the tape transport direction.
Let's record
Recording on TAPE
1 Open the door of deck B.
2 Insert a tape.
3 Close the door.
1 Select deck B by pressing the
A/B key.
2 Press the play key correspond-
ing to the desired direction.
3 Stop playback (by pressing the
& key).
To reverse the transport direction
÷ When recording is started, the
tape is transported in the direction
selected in this step.
÷ Wind the tape to the position
where recording is to be started.
Check the tape transport direction indicator. £
3. Set the recording condition.
1 Select the reverse mode. ª
2 Select the DOLBY NR mode. (XD-5...series only) ª
0
PUSH
OPEN
11
A
&
¡
#
¡
#
22
÷ The Tape Equalizer cannot be used in recording. (XD-4...series only)
When equalizer or another effect is applied
to the sound, the sound with the applied
effect can be recorded. i
Note that this cassette deck cannot record onto
Metal tapes.
NoteNote
Note
REV. MODE DOLBY NR
33
÷ Differentiation between normal
(TYPE
) and high (TYPE ) tape is
set automatically.
÷ Remove tape slack before load-
ing.
R D
S
11
55
33
44
22