Kenwood SW-505D Speaker User Manual


 
23
FRANÇAIS DEUTSCH
NEDERLANDS
ITALIANO ESPAÑOL
SW-505D (EN)
Specifications
Type ....................................................Subwoofer system with built-in amplifier
(Magnetically shielded)
[Amplifier]
Rated Output Power ........................150 W RMS 30 Hz ~ 200 Hz, 4
Phase Switching ...............................NORMAL, REVERSE
Input Sensitivity & Input Impedance
RCA-type pin-plug jack .................100 mV /12 k
200 mV /12 k (MONO Input)
Push-type terminals ......................1.7 V /15 k
[Speaker]
Enclosure ...........................................Bass-Reflex, Floor Standing Type
Speaker Unit .....................................250 mm(10") Cone type
Nominal Impedance .........................4
[General]
Rated Power Consumption ............50 W
Dimensions ........................................Width : 294 mm (11-9/16")
Height : 457 mm (18")
Depth : 415 mm (16-5/16")
Net Weight ........................................15.2 kg (33.5 lb)
NoteNote
Note
KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be
changed without notice.
Sufficient performance may not be exhibited at extremely cold locations (where water freezes).