Filter
Top Products
DMF-9020/MD-2070 (En)
36
Editing
Dividing the track being played (TRACK DIVIDE)
The modes are switched by rotating the JOG DIAL.
1 DIVIDE? : Dividing a track
2 COMBINE? : Combining tracks
3 ERASE? : Erasing track(s)
4 MOVE? : Moving (reordering) tracks
Use the following procedure to divide a track into two by inserting a track number in its middle. For example, by inserting an
additional track number before the passage you are specially fond of, it is easy to skip to there when you play the disc later.
Note that the track numbers of the tracks located after the divided track are automatically incremented.
The preview function allows to fine-adjust the track division point by playing the divided part repeatedly.
Select “DIVIDE”.
1
Select “DIVIDE”.
2
Set the selection (by pressing the JOG DIAL).
Preview the result.
1
Enter the DIVIDE mode.
2
Execute preview.
3
Fine-adjust the division point.
4
Establish the division point.
÷Fine adjustment is possible while monitoring the sound.
÷The dividing point can be fine-adjusted only in the forward direction
from the point where the EDIT / SPACE key was pressed initially, in 32
steps and for about 60 ms (6/100 sec.) per step.
It is recommended to start fine adjustment from slightly before the
initial division point.
÷The first 3 seconds after the division point is repeated.
÷If preview is started at the end of a track, the preview continues till the
next track (the first track if it is started in the last track), but the part in
the next track cannot be divided by TRACK DIVIDE.
÷Editing is aborted if no operation has been performed for 8 seconds.
Preparation
When preview is not required, press the ENTER key
once (so that “ok?” is displayed), then go to step 3.
1
Play the MD track to be divided.
2
Press the EDIT/SPACE key to switch
the editing mode on.
Some functions are limited due to the restrictions im-
posed by the MD standard. Before considering the symp-
toms as a sign of trouble with the unit, please read
“Symptoms related to MD standard”.
Q
Limitation of functionality due to MD standard
OVER (
−
dB)
R
L
DIVI
D
E?
∞
15
912 7
5
1
3
40 30
21
18
0
SEARCHPGM
MONITOR
ANALOG
32kHz
213
48kHz
44.1kHz
DIGITAL
OVER (
−
dB)
R
L
003
0
0
4?
∞
15
912 7
5
1
3
40 30
21
18
0
SEARCHPGM
MONITOR
ANALOG
32kHz
213
48kHz
44.1kHz
DIGITAL
START
REPEAT
DISC
OVER (
−
dB)
R
L
REMAIN
TOTAL
SINGLEP.C.
TITLE
VEDIID40+
∞
15
912 7
5
1
3
40 30
21
18
0
SEARCHPGM
MONITOR
ANALOG
32kHz
12
48kHz
44.1kHz
DIGITAL
OVER (
−
dB)
R
L
ok ?
∞
15
912 7
5
1
3
40 30
21
18
0
SEARCHPGM
MONITOR
ANALOG
32kHz
213
48kHz
44.1kHz
DIGITAL
1
2
START
REPEAT
DISC
OVER (
−
dB)
R
L
REMAIN
TOTAL
SINGLEP.C.
TITLE
EEIVRPES2WC
∞
15
912 7
5
1
3
40 30
21
18
0
SEARCHPGM
MONITOR
ANALOG
32kHz
12
48kHz
44.1kHz
DIGITAL
START
REPEAT
DISC
OVER (
−
dB)
R
L
REMAIN
TOTAL
SINGLEP.C.
TITLE
VEDIID00+
∞
15
912 7
5
1
3
40 30
21
18
0
SEARCHPGM
MONITOR
ANALOG
32kHz
12
48kHz
44.1kHz
DIGITAL
4¢
U PDOWN
PUSH SET
JOG DIAL
4¢
U PDOWN
PUSH SET
JOG DIAL
4¢
U PDOWN
PUSH SET
JOG DIAL
4¢
U PDOWN
PUSH SET
JOG DIAL
4¢
U PDOWN
PUSH SET
JOG DIAL
4¢
U PDOWN
PUSH SET
JOG DIAL