Filter
Top Products
17
Preparations
OperationsOther
KR-V9090/8090 (En/T)
Preparing for surround sound
4
Adjust the ROOM size.
1 Press to select ROOM.
2 Use the TUNING/SKIP +/– keys on the
remote to select the size you desire.
3 Press SETUP again to quit.
4 Press VIDEO once to return the remote to
its original operating mode.
SETUP
•The ROOM size is adjustable in 3 steps, "SML" (small), "MED"
(medium) and "LRG" (large).
VIDEO
TUNING/SKIP
• The input selector does not change the first time you press the VIDEO
key.
M OORMED
DSP
Display when the ROOM size setting is selected
Input level adjustment
The LEVEL INDICATOR lights during playback if the signal from an analog source is too large. If this occurs, use this function to attenuate
the level for that source.
1 Press the VIDEO, AUDIO, or TV key re-
peatedly to select the desired compo-
nent.
2 Press to select IN LVL.
3 Select the smallest level required to ex-
tinguish the LEVEL INDICATOR.
4 Press the SOUND key again to quit.
5 Press VIDEO once to return the remote to
its original operating mode.
AUDIO
TVVIDEO
SOUND
To increase
To decrease
TUNING/SKIP
•The input level is adjustable in 3 steps, 0 dB Ô –3 dB Ô –6 dB
(normally set to 0 dB).
• The bass and treble settings can also be adjusted using this procedure.
The display changes as shown below:
1 "BASS"
2 "TREBLE"
3 "IN LVL"
VLLNI-3dB
SURROUND
Display when IN LVL is selected
• The input selector does not change the first time you press the VIDEO
key.
• Input level adjustment is not possible when using the AUX.6CH INPUT
or ADAPTOR jacks.