Filter
Top Products
5
Preparation
Names and functions of parts
& SOURCE DIRECT key ¢
Use to pass the source material direct to the
amplifier.
* INPUT SELECTOR knob £
Use to select the input sources.
( AV AUX (S VIDEO, V, AUDIO L/R)
jacks *
Standby mode
When standby indicator is lit, this receiver is in standby mode and consumes a small amount of current for back-up. This system can be switched on using
remote control.
1 POWER key ¡
Use to switch the main power ON/OFF
2 ON/STANDBY ( ) key ¡
Use to switch the power ON/STANDBY when
the POWER is turned ON.
STANDBY indicator
3 MULTI CONTROL knob ¡
Use to control a variety of settings.
4 SET UP key ¡
Use to select the speakers' settings etc.
5 Surround indicators
DTS indicator ¤
Lights when the receiver is in the DTS mode.
DOLBY DIGITAL indicator ¤
Lights when the receiver is in the Dolby Digital
mode.
THX indicator ¢
Lights when the receiver is in the THX mode.
DSP MODE indicator ¤
Lights when the receiver is in the DSP mode.
CS 5.1 indicator ¤
Lights when the receiver is in the CS 5.1 mode.
6 INPUT MODE key 8
Use to switch between the digital and analog
inputs.
7 DIMMER key
Use to adjust the brightness of the display.›
Use to select the REC MODE. ∞
8 MONITOR key ∞
Use to monitor the source that is connected to
the MONITOR jack.
9 VOLUME CONTROL knob £
0 PHONES jack ¢
Use for headphone listening.
! SPEAKERS A/B keys £
Use to turn the A/B speakers ON/OFF.
@ SOUND key ¢
Use to adjust the sound quality and ambience
effects.
# BAND key §
Use to select the broadcast band.
$ AUTO key
Use to change “TAPE” indication to “MD”.
£
Use to select the auto tuning mode. §
% LISTEN MODE key ¤
Use to select the listening mode.
^ MEMORY key §
Use to store radio stations in the preset memory.
Display
Speaker selection indicators
Input channel indicators
Output channel indicators
Band indicators
AUTO indicator
MEMO. indicator
ST. indicator
TUNED indicator
3 STEREO indicator
STEREO indicator
Frequency display,
Input display,
Preset channel display,
Surround mode display
Speaker indicator
PRO LOGIC
indicator
S.DIRECT indicator
MONITOR indicator
DOWNMIX indicator
MUTE indicator
AUTO SOUND indicator DIGITAL indicator
DSP indicator
CLIP indicator
RDS indicators
(For U.K. only)
A SPEAKERS B
STANDBY
AUDIO-VIDEO SURROUND RECEIVER KRF-X9050D
MULTI CONTROL
LISTEN MODE
SOUND
SOURCE DIRECT
AUTO
BAND MEMORY
INPUT SELECTOR
VOLUME CONTROL
UPDOWN
THX DSP MODE CS 5·1
DOLBY
DIGITAL
DTS
INPUT MODESET UP
S-VIDEO V L – AUDIO – R
AV AUX
DIMMER MONITOR
PHONES
ON/STANDBY
ON OFF
TI.VOL
TP
EON
TA NEWS
FM
AM
MHz
kHz
PRO LOGIC
3 STEREO
DOWNMIX
DIGITAL
S.DIRECT
MONITOR
MEMO
ST.
TUNED
AUTO SOUND
AUTO
SP
LFE SW
C
AB
MUTE
S SRSL
RL
POWER
DSP
RDS PTY
CLIP