Kenwood KRF-V5200D Stereo Receiver User Manual


 
26
English
DVD 6-channel playback
Using a DVD player or the like equipped with six (5.1) output
channels and this unit, you can enjoy surround sound playback.
Connecting a DVD player which can decode the surround signal
itself is also acceptable.
INPUT SELECTOR
VOLUME CONTROL
VOLUME /o
INPUT MODE
DVD/6CH
Preparations
Connect your DVD player to the DVD/6CH INPUT
jacks of this unit.
Turn on all other components that will be used.
Complete <Speaker settings>.
œ Select "DVD/6CH" as the input source.
Press [INPUT MODE] to select "6CH INPT".
é Start playback of a DVD disc.
® Adjust the volume.
Notes:
It is not possible to adjust the speaker level or sound effect
([SETUP], [SOUND], [LISTEN MODE], [ACTIVE EQ] and [TONE] will
not be functional) of the channels separately when this unit is in
the 6CH INPUT mode. Adjust the speaker level with the controls
of the DVD player. Refer to the Instruction manual of the DVD
players for the detailed operating instructions.
For the powered subwoofer, you can adjust the volume of the
subwoofer using the subwoofer’s own volume control.
96kHz LPCM playback96kHz LPCM playback
This unit is compatible with the 96kHz LPCM playback. To play a
96kHz DVD, set the listen mode to "STEREO".
In "F-AUTO" input mode, the listen mode will automatically be
STEREO.
When in "D-MANUAL" input mode (listen mode is not STEREO),
"FS 96kHz" will appear in the display and no sound can be heard
from the speakers.
Press [LISTEN MODE] (the listen mode changes to the "STEREO"
mode) to output sound from the speakers.
Ambience effects