Kenwood KRF-X9060D Stereo Receiver User Manual


 
40
EN
TruBass adjustment mode (CS
II
mode only)
TruBass adjustment provides deep, rich bass sound to various speakers.
1 Press the SOUND key, then press the
MM
MM
M
/
??
??
?
keys or Joystick (2/3)
until TruBass appears.
2 Use the MULTI CONTROL knob or Joystick (5/) to select the
following;
1 TruBass OFF
2 TruBass SW
3 TruBass LR
4 TruBass SW + LR
After selecting 2, 3 or 4, TruBass speaker size and level adjustment
selection will be available.
3 For TruBass speaker selection, use the MULTI CONTROL knob
or Joystick (5/) to select any of the following display;
1 TruBass LARGE
2 TruBass MID
3 TruBass SMALL
4 Use the MULTI CONTROL knob or Joystick (5/) to adjust the
TruBass Level.
The adjustment range is from 0 (TruBass OFF) to 10.
L
SL SB SR
CR
SP MUTE
OPTICAL 6CH INPUT
COAXIAL ANALOG 96kHzfs
CINEMA EQ.
ACTIVE EQ.
DSP MODE
DTS.
MATRIX
DISCRETE
DOLBY DIGITAL
PRO LOGIC
STEREO
LOUDNESS
NEO:6
CSII
A B CLIP
AUTO DETECT THX
AUTO
RDS
RTY
MEMO
STEREO
TUNED
Surround EX
SW
LFE
Display dimmer adjustment
The dimmer function lets you select the brightness of the receiver's
display. You might find this useful if you darken your room to watch
movies or listen to music.
Each time you press the DIMMER key, the displays brightness
changes among the three available settings.
Select the brightness level you find most pleasing.
1 Bright
2 Medium
3 Dark
96kHz LPCM playback
The receiver is compatible with the 96kHz LPCM playback. To play a
96kHz DVD, set the listen mode to STEREO.
In FULL AUTO input mode, the listen mode will automatically be
STEREO.
When in DIGITAL MANUAL input mode (listen mode is not STEREO),
FS 96kHz will appear in the display and no sound can be heard from
the speakers.
Press the LISTEN MODE key (the listen mode changes to the STEREO
mode) to output sound from the speakers.
Ambience effects
VR6070/33-41/EN 3/26/02, 2:44 PM40