Filter
Top Products
By sliding the Manual Open Switch during forced closing, you
can open the control panel. Follow the directions below to
preset the number of times that this switch needs to be slid in
order to open the panel.
To preset the number of times to slide the Manual Open Switch:
Press the MENU button for at least one second.
"MENU" is displayed and the menu mode is turned on.
Press the ¢ button repeatedly until the Manual Open Switch
Setting function appears in the display. Press the 4 button to
search in the other direction.
The function setting is indicated by "OPEN SW #" in the display,
indicating that the Manual Open Switch Setting mode is on.
Switching settings
Press either the AM or FM button.
Press the FM button to change the setting number of times
higher, and press the AM button to change it lower. Settings
may be made from 1 to 3.
Press the MENU button to end the menu mode.
The "#" display in the Manual Open Switch Setting mode will
differ depending on the setting. The initial setting value is "1".
NOTE
4
3
2
1
Manual Open Switch Setting
Other features
— 29 —
MENU
EJECT
PROG/PTY
SCANB NR
B.S/RDM
REP D.SCN
MTL/M.RDM
NF
DISP
NAME.S
OFF
DISC
DISC
44W 4
LOUD
T I
VOL ADJ
4
¢
FM
AM/NF
AUD/
MENU
CLK
£
indicator
Clock display
£
indicator
Clock display
KRC-PS1077R/977R
KRC-877R/877W/777R
Signal senser