Filter
Top Products
— 20 —
English
Cassette player features (See page 6)
Playing Cassette Tapes
Loading and Playing Cassettes:
Press the ¡(EJECT) button to slide open the faceplate,
showing the cassette (insertion) slot. Holding the cassette with
the tape exposed to the right, insert it in the slot. The faceplate
will show the control panel, and the tape will start playing.
The ¢ indicator lights up when a cassette has been loaded.
Playing Cassettes Already Loaded:
Press the SRC button repeatedly until the tape mode is
obtained. "TAPE" is displayed when the tape mode has been
selected.
The tape will start playing.
Listening to the other side:
Press the PROG button.
Tape play switches to the other side.
Eject:
Press the ¡(EJECT) button to stop tape play. The faceplate
will slide to eject the tape.
Press the ¡(EJECT) button to show the control panel.
• The sound will be temporarily muted whilst the faceplate is
moving.
• The only buttons that will work during the eject state are the
¡(EJECT), SRC, TI and ATT buttons, as well as the volume
control button.
• Remove a cassette from the unit when not listening to it for a
whilst. If you leave it in the unit too long, the tape may stick to
the tape head and cause the unit to malfunction.
NOTE
Fast Forwarding and Rewinding Cassette Tapes
Fast Forwarding Tapes:
Press the FM button.
Rewinding Tapes:
Press the AM button.
Cancelling:
Press the PROG button.
Normal tape play returns.
Using Dolby B/C NR (Noise Reduction)
Listen to tapes recorded using the Dolby B or C NR system.
Turning Dolby NR On/Off:
Press the NR button repeatedly to switch the Dolby NR
selection as follows.
▼
Dolby B NR ON
▼
Dolby C NR ON (KRC-PS959R Only)
▼
OFF
The Dolby B NR indicator lights up when Dolby B NR is turned
on, and the Dolby C NR indicator when Dolby C NR is turned
on.
Dolby noise reduction manufactured under license from Dolby
Laboratories Licensing Corporation.
”DOLBY” and the double-D symbol are trademarks of Dolby
Laboratories Licensing Corporation.
Switching Tape Types
Select type of tape being played.
Switching Tape Types:
Press the MTL button to switch the MTL indicator on and off
and to select the tape type.
Turn the MTL indicator off for normal tape (Type I) playback.
Turn the MTL indicator on for the following tape types:
CrO
2
(Type II) FeCr (Type III) Metal (Type IV)
Selecting the wrong tape type may cause sound quality to
suffer.
Blank Skip Function
Automatically fast forwards to the beginning of the next track
when long blank spaces (10 seconds or more) are detected,
continuing tape playback. This function is on, when unit is
first powered on.