Filter
Top Products
— 31 —
Automatic Dimmer Function
The display dims when the car's lights are turned on.
The dimmer function is not available for units if the dimmer cable
is not connected.
NOTE
Function of the KRC-659R
Touch sensor tone
This function produces a beep sound that accompanies button
operation. It can be switched on or off.
Turning the Beep On/Off:
Hold down the MENU button for one second or more.
"MENU" is displayed and the menu mode is turned on.
Press the ¢ button repeatedly until the Touch sensor tone
function appears in the display.
Press the 4 button to search in the other direction.
The function setting is indicated by "BEEP ON" or "BEEP OFF"
in the display, indicating that the current beep setting is on or
off, respectively.
Switching settings
Press either the AM button or FM button.
The display and setting will change.
Press the MENU button to end the menu mode.
The beep sound is not output from the preout jacks.
NOTE
4
3
2
1
Switching Clock display
This function permits switching the clock display on/off when
switching the display during each of the modes.
Turning the Clock Display On/Off:
Hold down the MENU button for one second or more.
"MENU" is displayed and the menu mode is turned on.
Press the ¢ button repeatedly until the Switching Clock
Display function appears in the display.
Press the 4 button to search in the other direction.
The function setting is indicated by "CLK ON" or "CLK OFF" in
the display, indicating that the Switching Clock Display function
is on or off, respectively.
Switching settings
Press either the AM button or FM button .
The display and setting will change.
Press the MENU button to end the menu mode.
4
3
2
1